Immersion Transducer Models

Imaginant Delay-Line Immersion Transducer Models

Transducer Features:

• RoHS Compliant Design
• Excellent reliability
• High sensitivity.
• Standard Transducer Center Frequencies of 50, 75, 100, 110, 125, 150, 180 and 200 MHz.
• Custom frequency, element diameter, and delay line lengths available for volume applications.
• Customization of lens focal length and lens diameter available.
• Uniform unit-to-unit performance. 
• Custom marking with customer part numbers, if desired.
• Element Diameters up to 4mm with standard immersion case.
• Transducer encasement diameter:  0.625" (15.87 mm).
• Transducer length (including UHF connector): 2.08" (52.8 mm) for 4.25us Delay,  2.34" (59.4 mm) for 10.0us Delay.
• The highest transducer sensitivity will typically be attained using a short 25-Ohm coaxial cable between the transducer and Pulser-Receiver, especially for 150MHz and higher transducer center frequencies.
• Byk 25-Ohm cables of 23cm length with a right-angle SMA connector and a right-angle MicroDot (10-32) connector are available for purchase.

Standard Transducer Models Include: